Post subject: PPP encapsulation Posted: Mon Dec 20, 2010 9:50 am
Help others: Review your books and training products here
Why is it that when you configure PPP with authentication CHAP on each router, you get a constant stream of running lines on the screen? _________________ FJohnson
A+, Network+, MCSE 2000.
soon CCNA.
Joined: 26 Feb 2003 Posts: 5641 Location: New Zealand
Post subject: Posted: Mon Dec 20, 2010 11:09 am
Help others: Review your books and training products here
can you post those lines? _________________ Koen
CCSI #30501 CCNP CCIP CCVP CCSP CCDP Cisco Advanced Wireless LAN Field Specialist Cisco Unity Design Specialist Cisco IP Telephony Design Specialist JNCIS-ES JNCIA-ER JNCIA-EX MCSE MCSA:Messaging
Help others: Review your books and training products here
Serial2/0 LCP: State is Open
Serial2/0 LCP: State is Open
Serial2/0 IPCP: I CONFREQ [Closed] id 1 len 10
Serial2/0 IPCP: O CONFACK [Closed] id 1 len 10
Serial2/0 IPCP: I CONFREQ [Closed] id 1 len 10
Serial2/0 IPCP: O CONFACK [Closed] id 1 len 10
Serial2/0 LCP: State is Open
Serial2/0 IPCP: I CONFREQ [Closed] id 1 len 10
Serial2/0 IPCP: O CONFACK [Closed] id 1 len 10
Serial2/0 LCP: State is Open
Serial2/0 IPCP: I CONFREQ [Closed] id 1 len 10
Serial2/0 IPCP: O CONFACK [Closed] id 1 len 10
Serial2/0 LCP: State is Open
Serial2/0 LCP: State is Open
Serial2/0 IPCP: I CONFREQ [Closed] id 1 len 10
Serial2/0 IPCP: O CONFACK [Closed] id 1 len 10
Serial2/0 IPCP: I CONFREQ [Closed] id 1 len 10
Serial2/0 IPCP: O CONFACK [Closed] id 1 len 10
Serial2/0 LCP: State is Open
Serial2/0 LCP: State is Open
Serial2/0 IPCP: I CONFREQ [Closed] id 1 len 10
Serial2/0 IPCP: O CONFACK [Closed] id 1 len 10
Serial2/0 IPCP: I CONFREQ [Closed] id 1 len 10
Serial2/0 IPCP: O CONFACK [Closed] id 1 len 10
Serial2/0 LCP: State is Open
this is the process that happens, both routers just keep running. _________________ FJohnson
A+, Network+, MCSE 2000.
soon CCNA.
Help others: Review your books and training products here
P2P! is this the serial link? if so then yes, it is a lab (Packet Tracer). So before I do the configuration do I enter the no debug command? _________________ FJohnson
A+, Network+, MCSE 2000.
soon CCNA.
Joined: 26 Feb 2003 Posts: 5641 Location: New Zealand
Post subject: Posted: Sat Dec 25, 2010 6:15 am
Help others: Review your books and training products here
yes but could be a bug in the simulation _________________ Koen
CCSI #30501 CCNP CCIP CCVP CCSP CCDP Cisco Advanced Wireless LAN Field Specialist Cisco Unity Design Specialist Cisco IP Telephony Design Specialist JNCIS-ES JNCIA-ER JNCIA-EX MCSE MCSA:Messaging
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum